Hi I'm new to this reddit I have little knowledge about electronics from watching YouTube videos

So the ps4 does turn on blue light and fan sound Seem like the fan is okay not very loud

But theres no signal

HDD works I tried it on the laptop

USB doesn't seem to recognize the ps4 controller so I'll assume that it doesn't work

Previous owner told me that the main problem is the HD

I have a theory that the device power supply is changed and that broke the USB and the HD and the obtical

Cause I tried to plug a speaker in the obtical and theres no sound

Any suggestions?

Edit: if I unplugged the device while its running the blue light remains on for a few seconds Is that normal? I know its normal on some devices but for ps4 if its not normal its very possible that the power supply is not original

I wanna start by saying I understand its a risk to try and do mail-in repair with a stranger on reddit so I shouldn't be too shocked. But this is the most unprofessional and just overall awful experience I've ever had with an online seller and hes very active in this sub so I want to warn people. He WILLINGLY responded to my post offering me his repair services when I said I needed 7(?) psp's fixed. These are fixes that even I could finish all in one day as an amateur (screens, buttons). He confirmed he got my consoles, sat on them for TWO MONTHS (!!!!) and blamed a bunch of life problems. I was EXTREMELY patient and understanding regardless. After 2.5 months, I told him to just send me my shit back. He once again just held it for another 1.5 months now without sending it back, and EXPECTS ME TO PAY SHIPPING, with no other explanation other than he's "busy". The only reason I don't believe this guy is just a full on scammer is because its clear from his page and photos that he sent me that he does indeed do repair. I wouldn't be surprised if he lost my shit and just is scared to tell me or something. But either way its horrifically unprofessional and I'm out 7 consoles. PLEASE BE CAREFUL.

I wanna start by saying I understand its a risk to try and do mail-in repair with a stranger on reddit so I shouldn't be too shocked. But this is the most unprofessional and just overall awful experience I've ever had with an online seller and hes very active in this sub so I want to warn people. He WILLINGLY responded to my post offering me his repair services when I said I needed 7(?) psp's fixed. These are fixes that even I could finish all in one day as an amateur (screens, buttons). He confirmed he got my consoles, sat on them for TWO MONTHS (!!!!) and blamed a bunch of life problems. I was EXTREMELY patient and understanding regardless. After 2.5 months, I told him to just send me my shit back. He once again just held it for another 1.5 months now without sending it back, and EXPECTS ME TO PAY SHIPPING, with no other explanation other than he's "busy". The only reason I don't believe this guy is just a full on scammer is because its clear from his page and photos that he sent me that he does indeed do repair. I wouldn't be surprised if he lost my shit and just is scared to tell me or something. But either way its horrifically unprofessional and I'm out 7 consoles. PLEASE BE CAREFUL.

Yesterday i nocked out a capacitor near the apu pf the switch and now my switch wont turn on the wifi can someone help me with the right caps to put in and where to find it i cant seem to find it by my searches it seems to be an 0.1 uF 10v ceramic cap is that right and i cant find any place that sells that certain cap

I would assume the solider pads are damaged as well as probably missing capacitor(s)? I am not too sure but I have attached photos. I was planning on selling the device and was hoping to get advice from people more proficient in this before making any final decisions. I miss my console :(

https://preview.redd.it/4mwg6r1ghwce1.jpg?width=4032&format=pjpg&auto=webp&s=e51067b25c01c40f91a6aa88b63f20cd27d51758

https://preview.redd.it/gy3rvz1ghwce1.jpg?width=4032&format=pjpg&auto=webp&s=a2ee0335083ea991dcb1f085ecbe9d007974ea59

https://preview.redd.it/kogai02ghwce1.jpg?width=4032&format=pjpg&auto=webp&s=b0468606c3144134ae5ca3f4346fbfe67914c0b6

I can easily desolder and replace the power regulator but I’m afraid too much damage may be done already.

Lately I've been buying broken consoles to refurbish and sell. It's been going good so far, but I'm having trouble sourcing OEM (or just good quality) power supplies for the NES and SNES. I had been purchasing off-brand ones from AliExpress and they've seemed to work fine, but I'd rather find some original ones to be safe. I've found Japanese sellers on eBay selling used OEM N64 power supplies for around $6, so I've been buying those. But I can't seem to find NES or SNES cables under $15. Does anyone know of any sellers or have any suggestions?

I have two boards of ps5 Edm-020 Edm-033 Both of them they have same problem in same location

I change two ssd with new one and same things I found I remove that black spider I removing the wifi ic because I found it hot

And everything is same and same short

I use UART is showing to me PowerSequence - Power Sequence Error - General Power Failure (Peripheral, GDDR6, APU, Data Line Short)

Can anyone one help me?

Is this fixable if so how can I fix it

Any recommendations on a better place to source project consoles other than eBay or Facebook

Am I better off using a step down converter or are there any compatible European psu replacements?

Hey all!

So, lemme give you the quick rundown:

My Dad had an NES from when he was in College and gave it to me about 10 years ago. I cherished it and protected it with my life, and as time went on, it got harder and harder to read games. Sometimes it would take 4 tries, other times 20. A few months ago I opened the old thing, gave it a good dusting, cleaning with isopropyl and a toothbrush, and boiled the 72-pin connector. After that, it seemed to work first try, every time!

Jump to now.

I just got Mickey Mousecapade, and was super stoked to try it. I put in the game; flashing red light. I tried again; same thing. After 10 tries of nothing, I thought maybe the game was toast, But then I tried the rest of my games (Rad Racer, Blades of Steel, Mario/Duck Hunt, etc.) and couldn't get a single game to load.

When I look up how to make an NES work better, the best answer is boiling the connector, so I'm unsure what to do now. Do I need to get a new motherboard, or what?

Technical details:

These are the symptoms I get:

-Most often, turning the NES on results in the flashing red light.

-Other times, the red light will be solid, but I will just have a black screen.

-VERY OCCASIONALLY will a game actually play as usual (Mario/Duck Hunt seems to have the best luck)

Recent fixes I have attempted:

-boiling pin connector (roughly 4 months ago)

-Cleaning motherboard with isopropyl

-Using mild metal polish on motherboard connector for 72-pin connection (seemed to be a bit of oxidation on it, so I thought I'd give the polish a try)

Is my NES done for? Help!!!!!!!

My roommate and I have been trying to set up his childhood PS1 and have run into an issue that has us stumped. I'll try to give as much detail as possible.

The issue is that the console doesn't detect button inputs, and troubleshooting the problem has left us stumped. We've used two different controllers, both first generation without analog sticks, both functional as far as we know, neither makes any difference. We have also tried several different games, and this is where it gets extra confusing. 90% of the games tried booted up without issue, but accept no inputs at all, or give an error message that no controller is detected. One game specifically (Harry Potter and the Sorcerer's Stone) accepts a single button input to get past the start screen, then gives an error message that no controller is detected. Another game (Emperor's New Groove) accepts a button press to get past the start screen about 50% of the time before giving a no controller error message. One other game (Crash Bandicoot 2) works completely fine every time without issue, with either controller. This last bit has really confounded me.

I have tried leaving it unplugged and resetting it multiple times, I opened the console up, it was a little dusty but not exceptionally so or dirty. No obvious signs of corrosion. I cleaned up the controller and memory card ports with isopropyl and gave the inside a onceover. This did not help at all. All the same games behave in exactly the same way. Anyone have any ideas?

I have a Xbox one X that is overheating. I’ve cleaned and repasted the cpu and put in a different fan. The only thing I haven’t done is put new thermal pads on. But to me it doesn’t even sound like the fan is turning on. Any ideas?

I also posted here:

https://www.reddit.com/r/dreamcast/comments/1hzxaf5/is_my_unit_a_dud/

My Dreamcast seems to have some quite mild, but annoying issues.

The picture doesn't seem overly clear no matter what cable I use (including an hdmi adapter), the picture seems slightly dark and there are very faint horizontal lines moving up and down the screen. I also notice something in crazy taxi. Backgrounds occasionally aren't loading in to keep up with the speed of the taxi, leading to some awful pop up that I know didn't used to be there.

Any thoughts? Do I need to just replace the console?

Tia.

Hi everyone,

I’m new to the world of repairs, and this was my first attempt at soldering to remove a stripped screw on a Nintendo Switch. It was definitely a challenge, but after a lot of trial and error, I managed to get it done.

I documented the entire process in a video I uploaded to my YouTube channel.

I’d love to hear your feedback: What do you think of the method? Do you have any tips or advice for the future?

Thanks in advance! I’m excited to learn and improve with help from this amazing community :)

Pretty much the title. I turned on my ps4 and none of the controllers are connected, they're all blinking but none are connecting. I tried using a USB cable but that seems to only charge them. Any help here?

Hy everyone! I found this PS4 on the ground (lol), the video signal sometimes stays on for a long time, sometimes it goes by itself or when i move the cable - tap on the shell. The hdmi port looks a bit widened, bending it back should fix the problem? Last pic is my PS4 pro which works perfectly fine.

PS5 will turn on whenever it’s plugged in whether the HDMI is connected or not but then beeps twice (probably 4 seconds between each beep) and turns off. What could cause this problem? I tried looking it up but I’m not finding anything.

I recently purchased a handheld Android gaming device and a third-party 3D printed grip for it. It unfortunately lightly scratched and dented a portion of the device where the grip clips are present. The 3D grip apparently uses PLA plastic and the device’s plastic is ABS I believe. Is there any way I could “repair” or restore the small dented area? I was looking into touch-up pens but most are meant for automobiles and I don’t want to cause any further cosmetic damage. Here is an image link. Any advice would be greatly appreciated!