So yesterday my ps5 fell because i accidentally pulled on a cord and when It fell it fell with the hdmi cord in it I tried to plug it back in and now it’s not connecting to my tv I tried the same hdmi cord on a ps4 with a working port and it didn’t connect either I also tried to use a different cord but The cord was Kinda old so that didn’t work either I personally don’t think it’s the port but the cable what do y’all think

I’ve recently brought my Xbox series x to repair and they sent me this picture, looks like a dent on heatsink

Hello all,

The console turns on and off and when it’s on I have these artefacts.

What your opinions on the origin and possible repair?

I was in a car crash today ( everyone and every kitty is fine just a little sore ) And my ps5 ended up outside the vehicle from the trunk and landed in the snow, is there any chance it will still work? Or anything I can do to save it possibly? I haven’t turned it on yet and probably will wait a few days to even try to turn it on. Any suggestions or tips will truly help 🫶🏽

if i already killed and got rid of all the roaches inside my xbox via using isphoyal to gas/kill them all could i take it to a console cleaning place or no? the bugs would all be dead but would they still clean it out?

Hey everyone! I recently took on my first-ever PS4 repair. This console was shutting down after just 20 minutes of gaming due to severe overheating. I gave it a full cleaning, replaced the thermal pads and paste, and now it’s running like a dream!

The best part? A little boy is overjoyed to have his console working again. 😊 Let me know what you think !

The ps2 slim power button came off while I was cleaning is there any way I can save this?? I desperately need to.

Bought this ps5 just over a year ago (so no warranty), didn’t use the disc drive until I thought let me actually put the disc drive to use and bought the game. It makes this clicking sound when I put the disc in and the PS5 shows no indication that its aware there’s a disc inside.

Wanted to ask what the problem might be related to and would it be worth fixing?

I also posted here:

https://www.reddit.com/r/dreamcast/comments/1hzxaf5/is_my_unit_a_dud/

My Dreamcast seems to have some quite mild, but annoying issues.

The picture doesn't seem overly clear no matter what cable I use (including an hdmi adapter), the picture seems slightly dark and there are very faint horizontal lines moving up and down the screen. I also notice something in crazy taxi. Backgrounds occasionally aren't loading in to keep up with the speed of the taxi, leading to some awful pop up that I know didn't used to be there.

Any thoughts? Do I need to just replace the console?

Tia.

Hey all!

So, lemme give you the quick rundown:

My Dad had an NES from when he was in College and gave it to me about 10 years ago. I cherished it and protected it with my life, and as time went on, it got harder and harder to read games. Sometimes it would take 4 tries, other times 20. A few months ago I opened the old thing, gave it a good dusting, cleaning with isopropyl and a toothbrush, and boiled the 72-pin connector. After that, it seemed to work first try, every time!

Jump to now.

I just got Mickey Mousecapade, and was super stoked to try it. I put in the game; flashing red light. I tried again; same thing. After 10 tries of nothing, I thought maybe the game was toast, But then I tried the rest of my games (Rad Racer, Blades of Steel, Mario/Duck Hunt, etc.) and couldn't get a single game to load.

When I look up how to make an NES work better, the best answer is boiling the connector, so I'm unsure what to do now. Do I need to get a new motherboard, or what?

Technical details:

These are the symptoms I get:

-Most often, turning the NES on results in the flashing red light.

-Other times, the red light will be solid, but I will just have a black screen.

-VERY OCCASIONALLY will a game actually play as usual (Mario/Duck Hunt seems to have the best luck)

Recent fixes I have attempted:

-boiling pin connector (roughly 4 months ago)

-Cleaning motherboard with isopropyl

-Using mild metal polish on motherboard connector for 72-pin connection (seemed to be a bit of oxidation on it, so I thought I'd give the polish a try)

Is my NES done for? Help!!!!!!!

My 8Bitdo Ultimate C has a badly drifting right control stick which is outside the configurable dead zone in Steam and is not resolved by recalibrating the controller. This is the Ultimate C, not the 2C, so it does not come with Hall effect sticks. I don't want to throw out a controller I've owned for barely a year whose only issue is stick drift when I've fixed the same issue for other controllers in the past, but I can find zero information on what kind of stick replacements would be compatible with this controller. I honestly don't even care if the new sticks would be as expensive as just buying a 2C; I don't want to create unnecessary electronic waste.

Is anyone able to point me to control stick replacements usable with the 8Bitdo Ultimate C, or at least let me know how to confidently determine that a replacement kit will be compatible? If I can just grab some GuliKit sticks meant for another controller type like Xbox or Switch Pro that would be great, but I have no idea how to determine this. Hall effect sticks would obviously be preferable so I wouldn't have to do this repair again for a long time, but beggars can't be choosers.

My old ps3 cech 25xx no longer reads disc's I bought another which is a cech 20xx, was wondering if it would be worth it to repair the old one or just run the one I just bought and pros or cons to either? How hard would the repair be?

Hi

So I have a hacked V1. It works for typical things but I encounter weird problems when using USB 2.0 cables.

1. I can't write to the device using homebrew (ie. copying files to the switch). It just hangs. I can copy stuff from the Switch to the PC without issues.
2. Dock USB ports do not work. Like a switch pro controller cannot pair using the dock
3. Strangely, using a USB 3.0 OTG cable then connect it to the pro controller, it will work when connected to the switch
4. SD card works okay using a card reader.

Any way to fix this? Have multiple hacked Switches and non have this issue.

I am thinking maybe the trinket installation I did is causing the issue. It's connected directly to the 2 USB data pins, gnd and the designated 3.3V. I did not attach the joycon points since I use auto rcm but my other switch with the same setup is okay.

Before covid started I had bought many retro consoles going back to Atari and Nes and I am having some issues with image on diddys kong quest two pacman world and mrs pacman.
the issue is when I put the cartridge in and power on the unit the game works but the image is all pixelated and distorted. contact pin or bad solder point ?.

(Stock image above, not the actual defective board) I picked up a PSP 1000 off marketplace hoping for an easy fix.... Upon inspection, the mobo is missing the top square contact where the analog stick component makes contact. There is no easy way to fix this other than get a new mobo off Ali, right... ?

I've got a sega saturn with the ks350-1401 h031/04 power board and the ac power socket's plastic is broken where the screws are supposed to hold it in place. Everything is still functional, but I fear that plugging and unplugging the power cable from the console will cause the connector to snap off. I've found out the part number is an EDK power connector with the part number AC-M09PB42 but I can't find any place to purchase one from. Does anybody know of any repo or store where I could buy one of these to replace mine?

Just bought this nes console, guy said it worked 10 year ago. Mario bro/duck hunt game doesn't work, but tested several games i had. 3 games i tested all did something like this. All games deoxit was applied. On the console, it was pretty clean inside, lightly sanded the 72 pin and board with 1k grit sandpaper and applied deoxit. The gameplay results are the same. What do you think it is?

I've tried to connect my Switch to another dock and it didn't, in addition to this, I've also connected another Switch on my dock and it worked. So, my Switch is the problem. What would I do now?

Is there a permanent fix, or is the only way with isopropyl alcohol as a temporary fix?

One of the most satisfying feelings ever of fixing your first device.

My Xbox Controller was plagued with Stick Drift and managed to strip the controller down as my first attempt.

Also managed to fix the more severe Stick Drift in my PS4 Controller alongside a now working L2 button.

Can't wait to take apart my Nintendo Switch for a button repair and my Series X for a long needed cleaning.