Bought this ps5 just over a year ago (so no warranty), didn’t use the disc drive until I thought let me actually put the disc drive to use and bought the game. It makes this clicking sound when I put the disc in and the PS5 shows no indication that its aware there’s a disc inside.

Wanted to ask what the problem might be related to and would it be worth fixing?

So yesterday my ps5 fell because i accidentally pulled on a cord and when It fell it fell with the hdmi cord in it I tried to plug it back in and now it’s not connecting to my tv I tried the same hdmi cord on a ps4 with a working port and it didn’t connect either I also tried to use a different cord but The cord was Kinda old so that didn’t work either I personally don’t think it’s the port but the cable what do y’all think

I can easily desolder and replace the power regulator but I’m afraid too much damage may be done already.

So it overheated a few days ago And now this happens

Hello all,

The console turns on and off and when it’s on I have these artefacts.

What your opinions on the origin and possible repair?

I wanna start by saying I understand its a risk to try and do mail-in repair with a stranger on reddit so I shouldn't be too shocked. But this is the most unprofessional and just overall awful experience I've ever had with an online seller and hes very active in this sub so I want to warn people. He WILLINGLY responded to my post offering me his repair services when I said I needed 7(?) psp's fixed. These are fixes that even I could finish all in one day as an amateur (screens, buttons). He confirmed he got my consoles, sat on them for TWO MONTHS (!!!!) and blamed a bunch of life problems. I was EXTREMELY patient and understanding regardless. After 2.5 months, I told him to just send me my shit back. He once again just held it for another 1.5 months now without sending it back, and EXPECTS ME TO PAY SHIPPING, with no other explanation other than he's "busy". The only reason I don't believe this guy is just a full on scammer is because its clear from his page and photos that he sent me that he does indeed do repair. I wouldn't be surprised if he lost my shit and just is scared to tell me or something. But either way its horrifically unprofessional and I'm out 7 consoles. PLEASE BE CAREFUL.

I wanna start by saying I understand its a risk to try and do mail-in repair with a stranger on reddit so I shouldn't be too shocked. But this is the most unprofessional and just overall awful experience I've ever had with an online seller and hes very active in this sub so I want to warn people. He WILLINGLY responded to my post offering me his repair services when I said I needed 7(?) psp's fixed. These are fixes that even I could finish all in one day as an amateur (screens, buttons). He confirmed he got my consoles, sat on them for TWO MONTHS (!!!!) and blamed a bunch of life problems. I was EXTREMELY patient and understanding regardless. After 2.5 months, I told him to just send me my shit back. He once again just held it for another 1.5 months now without sending it back, and EXPECTS ME TO PAY SHIPPING, with no other explanation other than he's "busy". The only reason I don't believe this guy is just a full on scammer is because its clear from his page and photos that he sent me that he does indeed do repair. I wouldn't be surprised if he lost my shit and just is scared to tell me or something. But either way its horrifically unprofessional and I'm out 7 consoles. PLEASE BE CAREFUL.

Yesterday i nocked out a capacitor near the apu pf the switch and now my switch wont turn on the wifi can someone help me with the right caps to put in and where to find it i cant seem to find it by my searches it seems to be an 0.1 uF 10v ceramic cap is that right and i cant find any place that sells that certain cap

I would assume the solider pads are damaged as well as probably missing capacitor(s)? I am not too sure but I have attached photos. I was planning on selling the device and was hoping to get advice from people more proficient in this before making any final decisions. I miss my console :(

https://preview.redd.it/4mwg6r1ghwce1.jpg?width=4032&format=pjpg&auto=webp&s=e51067b25c01c40f91a6aa88b63f20cd27d51758

https://preview.redd.it/gy3rvz1ghwce1.jpg?width=4032&format=pjpg&auto=webp&s=a2ee0335083ea991dcb1f085ecbe9d007974ea59

https://preview.redd.it/kogai02ghwce1.jpg?width=4032&format=pjpg&auto=webp&s=b0468606c3144134ae5ca3f4346fbfe67914c0b6

Lately I've been buying broken consoles to refurbish and sell. It's been going good so far, but I'm having trouble sourcing OEM (or just good quality) power supplies for the NES and SNES. I had been purchasing off-brand ones from AliExpress and they've seemed to work fine, but I'd rather find some original ones to be safe. I've found Japanese sellers on eBay selling used OEM N64 power supplies for around $6, so I've been buying those. But I can't seem to find NES or SNES cables under $15. Does anyone know of any sellers or have any suggestions?

Is this fixable if so how can I fix it

Any recommendations on a better place to source project consoles other than eBay or Facebook

Am I better off using a step down converter or are there any compatible European psu replacements?

My roommate and I have been trying to set up his childhood PS1 and have run into an issue that has us stumped. I'll try to give as much detail as possible.

The issue is that the console doesn't detect button inputs, and troubleshooting the problem has left us stumped. We've used two different controllers, both first generation without analog sticks, both functional as far as we know, neither makes any difference. We have also tried several different games, and this is where it gets extra confusing. 90% of the games tried booted up without issue, but accept no inputs at all, or give an error message that no controller is detected. One game specifically (Harry Potter and the Sorcerer's Stone) accepts a single button input to get past the start screen, then gives an error message that no controller is detected. Another game (Emperor's New Groove) accepts a button press to get past the start screen about 50% of the time before giving a no controller error message. One other game (Crash Bandicoot 2) works completely fine every time without issue, with either controller. This last bit has really confounded me.

I have tried leaving it unplugged and resetting it multiple times, I opened the console up, it was a little dusty but not exceptionally so or dirty. No obvious signs of corrosion. I cleaned up the controller and memory card ports with isopropyl and gave the inside a onceover. This did not help at all. All the same games behave in exactly the same way. Anyone have any ideas?

I have a Xbox one X that is overheating. I’ve cleaned and repasted the cpu and put in a different fan. The only thing I haven’t done is put new thermal pads on. But to me it doesn’t even sound like the fan is turning on. Any ideas?

Hi everyone,

I’m new to the world of repairs, and this was my first attempt at soldering to remove a stripped screw on a Nintendo Switch. It was definitely a challenge, but after a lot of trial and error, I managed to get it done.

I documented the entire process in a video I uploaded to my YouTube channel.

I’d love to hear your feedback: What do you think of the method? Do you have any tips or advice for the future?

Thanks in advance! I’m excited to learn and improve with help from this amazing community :)

Pretty much the title. I turned on my ps4 and none of the controllers are connected, they're all blinking but none are connecting. I tried using a USB cable but that seems to only charge them. Any help here?

Hy everyone! I found this PS4 on the ground (lol), the video signal sometimes stays on for a long time, sometimes it goes by itself or when i move the cable - tap on the shell. The hdmi port looks a bit widened, bending it back should fix the problem? Last pic is my PS4 pro which works perfectly fine.

PS5 will turn on whenever it’s plugged in whether the HDMI is connected or not but then beeps twice (probably 4 seconds between each beep) and turns off. What could cause this problem? I tried looking it up but I’m not finding anything.

I recently purchased a handheld Android gaming device and a third-party 3D printed grip for it. It unfortunately lightly scratched and dented a portion of the device where the grip clips are present. The 3D grip apparently uses PLA plastic and the device’s plastic is ABS I believe. Is there any way I could “repair” or restore the small dented area? I was looking into touch-up pens but most are meant for automobiles and I don’t want to cause any further cosmetic damage. Here is an image link. Any advice would be greatly appreciated!

GUYS I NEED SOME HELP I recently installed a new fan for my ps4 and everything went fine until the ps4 suddenly shut down.

So because nothing was working I came to the conclusion that the Powersupply was dead. And I was right. Because when I installed a new one everything was running perfectly again. Its just that Im scared that it might happen again. So does anybody know what couldve been the reason for the powersupply dying. Because Im just a bit scared when Im playing on the ps4.

I have two boards of ps5 Edm-020 Edm-033 Both of them they have same problem in same location

I change two ssd with new one and same things I found I remove that black spider I removing the wifi ic because I found it hot

And everything is same and same short

I use UART is showing to me PowerSequence - Power Sequence Error - General Power Failure (Peripheral, GDDR6, APU, Data Line Short)

Can anyone one help me?